One of the best ways to make sure that your pet is safe and in its boundary is getting the PetSafe Wireless Containment System PIF 300. The containment system works flawlessly and you will not need to use a boundary wire because it works wirelessly. It is a practical, easy to use application, you only need to plug it in, and adjust it to the radius you like and from there you will start to train your pet.
With only a 5 minute installation, you will have a free weekend from burying the boundary wire! The best part is that you don’t need to worry about maintaining it because there is no wire that can be broken! This is one of the many reasons why people are using the PetSafe Wireless PIF 300, for different size of homes and also when going camping. Another easy thing that you need to do is to place the system in the center of the property and there is no problem when it comes to the walls it will transmit smoothly.
Product Description
Circular Boundaries: Wireless units only let you have a circular boundary, with the control box in the center of that boundary. You can overlap multiple control boxes with some systems, like the PetSafe Wireless PIF-300, but even then it is very hard to get good coverage of the average lot which is a long thin rectangle.
You need to know that the transmitter can be only made in a circular are and it can’t be changed into a Rectangle shape or Square shape. There are some factors that you need to be aware of the wireless transmitter. The factors like topography and metal can affect the range of the transmission.
Even that the system is simple, it is also effective and is the best alternative to the buried wire and outdoor fencing. By utilizing radio frequency, you won’t need boundary wire or spools to keep your pet going off the place where is not allowed. Your pet will have more fun even when you want to travel because the system is portable.
The Wireless System will make sure that your pet over 8 pounds to be contained safely within the area you have chosen. When you plug in the transmitter, you can adjust the range up to ninety feet, covering all directions. It can easily be installed within 1 hour and it will give you the chance to train your pet in the best way and no need for additional items to buy.
Once you begin training with the Pet Safe PIF-300, you will need to place the flags that are included in the package. The flags will help the pet to see where its boundaries are. Then place collar on its neck by adjusting according to the neck. Then you need to ensure that points of contact are touching your pet’s neck. This system is used for pets that are six months old or more.
If your pet reaches the “warning zone”, then the collar will emit a sound warning the pet and if the pet continues over the “warning zone” the collar will deliver a static correction through the points. This will go on until the pet is back in the pet area.
Benefits of the PIF-300
- A Wide Adjustable Circular Range: Adjustable circular area that covers a diameter of 180 feet
- Wireless: There is no need of burying a cable in the ground
- Easy and Simple Installation: Plug in the transmitter put the collar on and start training your pet
- Portable: You can take and use the PetSafe Wireless Containment System everywhere you go
- Adjustable: There are 5 levels for adjusting the correction.
- Receiver is waterproof: You can use the collar in any type of climate.
- Battery Low Warning: The collar will give you an alert when you need to replace your battery
- Perimeter warning tone: The receiver will emit a warning tone when the pet will go closer to the end of their boundary.
- Shuts-off automatically: When your pet exits the boundary area, a 30 second limit is placed on the stimulation and it will automatically shut off and restart after 5 minutes.
- Instructional Manual: The manual that will help you with the training is included in the package
Specification about the PetSafe PIF-300
The final thing that you need to know when thinking about the safety of your pet and in the same way finding the best way to train him without limiting his fun time you are probably want to know what are the specifications of this PetSafe wireless system. That is why here are separated specification for the Transmitter and also the Receiver collar.
Specifications of the Transmitter:
- 18 kHz Frequency
- Depth: 8.5 inches, Width: 9 inches, Height: 9 inches
- 250 volt ½ amps fuse
- Rounded barrel/front shaped
- Low/High dial and boundary controls
- The color is Light gray
- On the left side there is the Off/On switch
- Battery 6-volt
- Depth: 1 inch, Width: 2 inches, Height: 1 inch
- Weight: 2.5 OZ.
- Waterproof
- Indicator for low battery that will signalize a flash of light on every 4-5 seconds
- Short and long contact points
Receiver Collar Specifications:
- Battery 6-volt
- Depth: 1 inch, Width: 2 inches, Height: 1 inch
- Weight: 2.5 OZ.
- Waterproof
- Indicator for low battery that will signalize a flash of light on every 4-5 seconds
- Short and long contact points